Courses / Comprehensive design 1

Course data
Code: BMEEPIPT811, BMEEPIPM1KX
Course requirements: BMEEPIPT711, BMEEPIPM111
Final requirements: Participation in 70% of the lessons is set as a condition. Only the active practice counts for presence.
Credits: 10
Time: 10 hours practice
Coursemaster: Bartók István DLA
Instructors: Bartók István DLA
Nagy Iván DLA
Szabó Dávid DLA
Szécsi Zoltán DLA
Vasáros Zsolt DLA
Árva József DLA
Description:

Information

 

for elaboration of the project

 

 

Character of the project

Comprehensive design is a two semester course. The task of the first semester – Comprehensive design I – is the elaboration of the projects program design, Comprehensive design II is for the detailed elaboration of the design.

During this one has to acquire the method to develop concept to technical solution. This phase of architectural design is a primary condition of feasibility of any building. A perfect concept can only become a successful work through the careful, technically correct, aesthetic forming and elaboration of the details. Forming details requires high degree of professional knowledge, advanced aesthetical sense, holistic creative skills and realistic economic approach. To acquire the methods of this complicated activity only on basic level intensive utilization of the study period is necessary. The project has to be improved on the base of critics on the Comprehensive design I of the departments. The projects can be improved in terms of architecture as well with the possible presenting of the original concept.

 

Work process

First the preliminary designs should be completed due to the given schedule (scale m=1:100, m=1:50) from every part of the design. The plans should be presented within the terms due to time schedule. This will be followed by the elaboration of details, finalization of constructions. The elaboration of the final project can be fulfilled using the details and the result of consultation with the associate departments. Certain to be solved tasks will be pointed out and evaluated by the consulting associate departments.

 

Evaluation

In the mark of the final project architecture counts 40%, whereas the associate departments 15-15% each. Any part of the project is fail, the mark of the whole project is fail too. The final mark is given from the final project and the results of the comprehensive tests – due to the faculty’s regulation.

 

Deadlines

The project submission is due to the faculty’s regulation and enclosed timetable. To the successful fulfilment the certain parts of the project must be handed in, or presented.

 

Content of the plans

The plans should be filled with a maximum of technical content based on the solution of the details. We mainly expect the elaboration of more complicated parts of the building, with the solution of development and building together of bearing structures, of façade details and situating constructions of building services determining the architectural look.

 


 

Parts of the project to submit

 

  1. Site plan m=1:500. New site plan is only necessary in case of bigger change, wrong or imperfect plan.

 

  1. Plans of each different level m=1:50

with representation the close surroundings, the main and particular dimensions, grid, the measures of each room, doors with opening direction, windows with subdivisions, marking the functional necessary installation, the names, measures and finishes of the rooms. In case of a greater establishment - checked by the consultant - the elaboration of a certain part of the building is enough.

 

3.       Sections m=1:50

The number of sections to submit depends on the variety of constructions and the complexity of the building. The solutions of constructions of each main volume of the building should be shown. Also in case of a block-like building, or unified construction at least 2 sections perpendicular to each other are necessary, (without the repetitive constructions)

with representation the typical height measures and the plan measures of the axis, the level heights, the names of the structures and materials, the order of layers

 

4.       All elevations m=1:50

with representation of structures (different levels signed with short dashed lines), the typical height measures, materials, colours. In case of a greater establishment - checked by the consultant - the elaboration of a certain part of the building is enough.

 

5.       Interior plan m= 1:20, 1:10, 1:5

The solution of a characteristic, architecturally demanding room (eg. foyer), construction details

floor plan, cladding plan of the internal walls, built-in furniture, equipments, plan of suspended ceiling with light and ventilation elements

Perspective views of the interior.

 

6.       Architectural description, showing the context of architectural and construction solutions. It should contain data not seen on the plan, demanded explanations for construction, working principles of structures, motivation of material and structure choices.

 

7.       Parts of design and descriptions of structures, building constructions, building services, construction technology due to requirements of each associate department.

 

8.       Other parts of design. Beyond these parts of design consultants may ask for solution of special details – depending on the character of the task.

 

9.       The plans of Comprehensive design I are to submit in a separate folder.

 


 

Test

For practice planning skills and architectural, logical way of thinking there is one compulsory design tests during the semester. Since all necessary information will be given for completing the test, there is no need for previous preparation. The mark of the test counts 15% in the final mark of the course.

 

 

Other regulations, obtaining the final mark and the signature:

A./        Formal requirements: All drawings can be traditional hand- or CAD drawings or any other optional official scaled printed technique. The clear and correct technical presentation detailed due to the scale is important. The mid-term and final plans the can be handed in at biggest 60x80 cm, or folded to that size, or can be accepted as a documentation folded on A4 size. The dimensions are bound for storing and exhibition reasons. Smaller size can be used as well, but the use of different size plans destroys the level of the documentation. A stable cover due to the plans dimensions with index is necessary. The elaboration of the plans should be discussed with the consultant.

B./        Participation in 70% of the lessons is set as a condition. Only the active practice counts for presence. In case of absence from more than 30% of the total number of lessons the credits of the subject cannot be obtained. Design practice lessons due to the Code of Studies and the Faculty’s supplementary decisions are considered as irreplaceable atelier practice.

C./        By the deadline due to the timetable the final project must be handed in – irrespectively of its readiness.

D./        One test with at least a pass mark. The 1st test is obligatory.

E./        The project submission is due to the faculty’s regulation and enclosed timetable. In the mark of the final project architecture counts 40%, whereas the associate departments 15-15% each. Any part of the project is fail, the mark of the whole project is fail too. The final mark is given from the weighted average of the final project and the results of the mid-term presentations.

 

 

18th January 2022.

 

Bartók István DLA                                                              prof. Zsolt Vasáros DLA

associate professor                                                           university professor

head of course                                                                   head of department

 

Schedule:
1.14th February 2022, Monday 8:15-13:00 K 211 Introduction 
17th February 2022, Thursday 8:15-13:00 K 211 Program analysis 
2.21st February 2022, Monday 8:15-13:00 K 211 Site visit 
24th February 2022, Thursday 8:15-13:00 K 211 Elaboration of concept design, Announcement of test 
3.28th February 2022, Monday 8:15-13:00 K 211 Submission and presentation of test 
3rd March 2022, Thursday 8:15-13:00 K 211 Elaboration of concept design 
4.7th March 2022, Monday 8:15-13:00 K 211 Elaboration of concept design – 1st constructor’s day 
10th March 2022, Thursday 8:15-13:00 K 211 Elaboration of concept design 
5.14th March 2022, Monday  Day off 
17th March 2022, Thursday 8:15-13:00 K 211 Concept design, 1st mid-term presentation, evaluation 
6.21st March 2022, Monday K 211 Elaboration of preliminary design 
24th March 2022, Thursday 8:15-13:00 K 211 Concept design, 1st additional mid-term presentation 
7.28th March 2022, Monday  Studio week 
31st March 2022, Thursday  Studio week 
8.4th April 2022, Monday 8:15-13:00 K 211 Elaboration of preliminary design 
7th April 2022, Thursday 8:15-13:00 K 211 Elaboration of preliminary design 
9.11th April 2022, Monday 8:15-13:00 K 211 Elaboration of preliminary design – 2nd constructor’s day 
14th April 2022, Thursday  Spring holiday 14th – 20th April 
10.18th April 2022, Monday  Spring holiday 14th – 20th April 
21st April 2021, Thursday 8:15-13:00 K 211 Preliminary design, 2nd mid-term presentation, evaluation 
11.25th April 2022, Monday 8:15-13:00 K 211 Elaboration of final design 
28th April 2022, Thursday 8:15-13:00 K 211 Preliminary design, 2nd additional mid-term presentation Announcement of additional test 
12.2nd May 2022, Monday 8:15-13:00 K 211 Elaboration of final design Submission and presentation of additional test 
5th May 2022, Thursday 8:15-13:00 K 211 Elaboration of final design 
13.9th May 2022, Monday 8:15-13:00 K 211 Elaboration of final design 
12th May 2022, Thursday 8:15-13:00 K 211 Elaboration of final design 
14.16th May 2022, Monday 8:15-13:00 K 211 Project finalization week 
20th May 2022, Friday 23:59 K 251 Project submission Friday, May 20th 2022. 2359 
15.   
27th May 2022, Friday 23:59 K 251 Delayed submission with late fee Friday, Friday, May 27th 2022. 2359 
News
2021. 12. 22. 19:00

COMPREHENSIVE DESIGN 1 AND DIPLOMA COURSE APPLICATION

Dear future Comprehensive 1 and Diploma students,
kindly find enclosed the announcement, the application form for the Comprehensive 1 course 2022 spring semester and the slides of the 1st orientation lecture. Deadline for Comprehensive1 students for application and submitting the digital prtfolios: Friday 12:00 o'clock, 7th January 2022.

Orientation lecture about the topics: Wednesday 3:00pm, 5th January 2022 in person in the library of the Department of Explorative Architecture room: K 251. and via TEAMS. Teams code: 5mubhnx


2021. 02. 18. 09:24
Dear Students,

kindly find the questions and answers enclosed.


Dear Students,

kindly find the announcement of the comprehensive design test attached!
2021. 01. 27. 19:02
Dear Students,
please find the list of accepted students for our departmental Comprehensive Design 1 Course. There is an additional application until 3rd February 2021. 10.00 AM, please find the application form and a requirements in the previous announcement!
2021. 01. 15. 22:14
Dear Students,
kindly find the list of accepted students for our Comprehensive Design 1 Course.

We kindly ask you to reply about the acceptance of the obtained place to the following address: komplextervezes@gmail.com asap., but latest until 4.00 pm Tuesday 26th January 2020.
Attachments:
CD1_accepted_students_IND.pdf (51 kB)
2021. 01. 06. 16:18
Dear future Comprehensive 1 and Diploma students, we hereby invite you for the
2nd orientation lecture about the topics DIPLOMA_COMPLEX 1 on Thursday 07. 01. 2021 at 3.00 pm!

Deadline for Comprehensive1 students for application and submitting the digital portfolios: Friday 12:00, 8th January 2021.

link
Newer posts
Earlier posts